The case fits the Deus I and ORX. It features rubber buttons that significantly improve usability. It has a two-stage display cover that protects the display from rain and scratches. A speaker cover is mounted on the back of the case, significantly reducing noise. The case is designed to accept an accessory latch that allows the case to slide forward or backward. The cover can be removed by unscrewing four screws and removing the black round element, or by removing both elements. The charging and headphone jacks are protected by an additional rubber element that presses into the appropriate guides. Removing the rubber cover does not require disassembling the case. The set includes a key for screwing the case halves together and spare screws. To install the panel in the case, unscrew the case and place the panel on the two protrusions at the bottom of the case. The panel should not protrude above the bottom of the case. I do not recommend pressing the case buttons without the panel installed. 

THE HOUSING IS NOT WATERPROOF AND CANNOT BE SUBMERGED IN WATER.

THE CASE IS NOT WATERPROOF AND CANNOT BE SUBMERGED IN WATER.

The RC XP Deus 1 panel housing cover module helps to significantly reduce sun reflection from the display. Adjustment range 180 degrees. Mounted using screws included in the kit.